T-6A Texan II – Build Log

About two weeks ago, I started building a T-6A Texan II.  This is the Beechcraft version built by Raytheon Aircraft Company.

In the image above, the fuselage is about complete.  I am fitting the cockpit items; dahs and pilots.  None of this is glued in place yet; I still have some trimming of the front dash to do.

This should be a very cool airplane!

Specifications

Wing Span 63.0″
Wing Area 647.9 square inches
Flying Weight 8 to 9 pounds
Length 58.3″
Motor Working on power configuration.
E-flite Power 90 or Power 110?
Hacker A50-16L?
UPDATE – I’ve made my decision.  I’m going with the E-flite Power 90, 8S 5000mAh batteries and 16×8 prop.  This will produce 1800 watts max. which is plenty of power for this aircraft.
Retracts 60-120 Tricycle Electric Retracts by E-flite

Here you can read the other articles about this build process.

About the Beechcraft T-6A Texan II

The Beechcraft T-6 Texan II is a single-engined turboprop aircraft built by the Raytheon Aircraft Company (which became Hawker Beechcraft and is now Beechcraft Corporation).  Based on the Pilatus PC-9, the T-6A is used by the United States Air Force for basic pilot training and by the United States Navy for Primary and Intermediate Joint Naval Flight Officer (NFO) and Air Force Combat Systems Officer (CSO) training.  It has replaced the Air Force’s Cessna T-37B Tweet and is replacing the Navy’s T-34C Turbo Mentor.  The T-6A is also used as a basic trainer by the Royal Canadian Air Force (CT-156 Harvard II), the German Air Force, the Greek Air Force, the Israeli Air Force (Efroni), and the Iraqi Air Force.  The T-6C is used for training by the Royal Moroccan Air Force and the Mexican Air Force.  The Royal New Zealand Air Force will also begin operating the type in 2015.

Northern California ARMA Seminar Panel Member

On March 6, 2014, I will be a panel member at the Northern California ARMA Seminar.  I am honored the Northern California ARMA would invite me to be a panel member and am looking forward to it.

At this seminar, we will be focusing on Records Management and I have been asked to attend and share my experiences with Records Management in SharePoint.

This should be very informative and I hope to see you there!

Register for this Event Here

Who is ARMA?
ARMA International is a not-for-profit professional association and the authority on governing information as a strategic asset.

The association was established in 1955. Its approximately 27,000+ members include information managers, information governance professionals, archivists, corporate librarians, imaging specialists, legal professionals, IT managers, consultants, and educators, all of whom work in a wide variety of industries, including government, legal, healthcare, financial services, and petroleum in the United States, Canada, and more than 30 other countries around the globe.
ARMA International offers invaluable resources such as: •Legislative and regulatory updates
•Standards and best practices
•Technology trends and applications
•Live and Web-based education
•Marketplace news and analysis
•Books & videos on managing records and information
•Global network of 27,000+ information management professionals and more than 10,000 professional members

ARMA International publishes Information Management magazine, the only professional journal specifically for professionals who manage information as part of their job description. The award-winning IM magazine is published bi-monthly and features articles on the hottest topics in information governance today, as well as marketplace news and analysis.

The association also develops and publishes standards and guidelines related to records management. It was a key contributor to the international records management standard, ISO-15489.

First Cilantro Harvest and Process

I harvested and processed fresh cilantro from the garden today.  Once your cilantro is ready for harvesting, cut from the plant, discard and brown leaves and wash.  I then let it dry on a paper towel overnight.  Lastly, I dry my cilantro for later use.  Using this type of drying approach, the cilantro will stay for up to 24 months.

2014-02-26-CilantroDry672x502

Stay Hungry!

100cc Extra 260 IMAC Competition Aerobatics Build

One of my favorite airplanes is the Extra 260.  I have many in various sizes.  This is my AeroWorks 100cc Extra 260; which I use in IMAC International Competition Aerobatics events.

Wing Span 104 inches (8.6 feet)
Wing Area 1867
Weight 27 pounds
Engine 3W 110cc CS Gas, 12.8 HP
Servos (9) Hitec Digital (Programmable)
Power Distribution Smart-Fly Power Expander Pro

3W 110cc Competition Series (Twin Cylinder) Gas Engine

I decided to power this aircraft with the 3W 110cc Competition Series Engine instead of the DA-100 because of the horsepower it produces.  The 3W 110cc engine produces 12.8 horsepower; which provides unlimited vertical for hovering and punching out of any maneuver.

100ccExtra260Engine600x760

Electronics and Flight Controls

The electronics and flight controls have become very sophisticated.  Programmable servos, multiple servos on all flight surfaces, remote receivers, optical engine cut-off, backup and fail-over systems and more…

Each of the (9) servos are connected to a dedicated receiver channel.  This provides the ability to fine tune each servo.

100ccExtra260Electronics600x1065

Smart-Fly Power Distribution

The Smart-Fly Power Expander Pro provides power distribution, regulated voltage to all servos and fail-over power (battery) management.

100ccExtra260Smartfly600x338

Cockpit

Cockpit detail is required to for IMAC competition; both pilot and dash details.  Besides, it looks cool…

100ccExtra260Cockpit600x800

Flying

This aircraft is a blast to fly. It has unlimited vertical performance and easily executes any aerobatic maneuver!

100ccExtra260Flying600x500

Team Hammerhead!

Fly Safe and Enjoy…

Planted More Beefsteak Tomatoes Today

It is a beautiful day out today so I thought I would do more thinning and transplanting.

Today I planted 2 more Beefsteak Tomato plants. These should be ready to harvest in late May to mid April.

2014-02-24-BeefsteakTomatoes2_268x200

More on Tomatoes…

I also planted more Rosemary and Greek Basil.  These should both be ready for use in about a month as they are already very mature pants.

This is the advantage of sowing seeds, indoors, early in the season!

Alfredo Sauce

Alfredo Sauce

Author: Bob Mixon

Alfredo sauce is very versatile and wonderful over fettuccini and other pasta. Use this basic Alfredo sauce over pasta and add broccoli or shrimp. ~yum~

Servings: 4

Ingredients

2 cups (1 pint carton) Heavy Cream
12 tablespoons Unsalted Butter
1/2 tablespoon Fresh Garlic, Minced
2 cups Parmesan Cheese, Grated
2 cups Asiago Cheese, Grated
Salt and Fresh Ground (white) Pepper

Directions

1. Add heavy cream and butter to a large sauce pan and cook, over medium heat, until butter melts; about 3 minutes. The key is to heat this slowly as to not scorch the mixture.

2. Add the fresh minced garlic.

3. Slowly stir in small amounts of the Parmesan and Asiago cheese. Stir sauce continuously as the cheese melts.

4. Once all cheese has melted, remove from heat.

5. Let the sauce stand for 5 minutes before serving.

6. Salt and pepper to taste.

Notes

Fettuccini Alfredo – Add this Alfredo Sauce to cooked Fettuccini and mix. After the butter has melted, step 1 above, add 1/2 cup fresh lemon juice. Once you have combined the Alfredo Sauce and Fettuccini, incorporate 2 teaspoons grated lemon zest and a small pinch of nutmeg. Top with steamed broccoli, asparagus or shrimp.

Factors that Drive the Success of Information Use

There are many factors that comprise the successful implementation of a SharePoint solution.  Regardless of what it is you are building, the following key success factors apply.

  1. Ease the Pains Associated with Storing and Managing Information
  2. Provide Meaningful and Accurate Information to Consumers
  3. Promote the Agile Evolution of Information Use
  4. Governance
  5. Education

Each of these Key Success Factors is described in more detail below.

Ease the Pains Associated with Storing and Managing Information

First and foremost, your information must be stored in a manner that is consistent, easy to understand and easy to maintain.  Without information, you wouldn’t have the need for a content management solution and without easing the pains associated with storing and managing this information, Contributors will be less likely to use the solution.

There are specific techniques that can be used when implementing SharePoint that can simplify the contribution and maintenance of information.

Content Categorization – We use content categorization to understand the types of content being stored which aids with:

  • Reducing the question “where do I store and manage this content”,
  • Provides a means to preset metadata with default values; reducing the metadata values that must be manually entered by a user, and
  • Search scoping, information aggregation and metadata filtering.

Without adding some level of structure to your content, you will accomplish little.  Storing and managing your content using the same approach as what was found on file shares adds zero value.  You will eventually end up with hundreds, if not thousands, of sites.  Many of those sites will have document libraries with many folders and sub-folders.  Users will quickly be uncertain to where content should be stored.  Managing unstructured content without any level of categorization will always lead to diminishing adoption, frustration and distrust in the technology.

Take the time to categorize your content, apply grouping principals and governing rules for appropriate use and you will be working towards a solution users adopt and become more efficient executing day to day business operations.

Understanding – The implementation team must have a thorough understanding of the content to be managed; thus implementing a solution that is consistent and eliminates ambiguity.

For example, the term Contract can have many definitions in an organization; Employee Contract, Customer Contract, Vendor Contract, etc.  These contract examples have entirely different meanings, uses and associated processes.  By thoroughly understanding the information, a solution can be appropriately architected to eliminate this type of ambiguity.

Responsibility – The responsibility of information belongs in the hands of the information owners.  When we implement solutions that aid in the ownership and responsibility of managing information, that information is more likely to be fresh, up to date and accurate.

Process – Information only has real value when it is used in actions and to facilitate decisions:

  • Improved decision-making
  • Simplify work and information flows
  • Achieving action plans and change initiatives
  • Developing information value chains
  • Maximizing use of information

Making process an integral part of architecture is a great way of adding value to your business.

Metadata – Metadata allows you to store and manage instance specific information for your content.  For example, having the ability to store the date of a meeting with the meeting minutes document will allow you to quickly locate that meeting document by meeting date.  And, storing the value of a contract with each customer contract document would allow you to filter all customers that have executed a contract greater than $100,000; which might aid with a marketing effort.

Many fear the use of metadata as there is a belief it is too much work for the user when uploading a new document or adding a new item to a list.  Various techniques can be utilized to overcome these fears.  These techniques include (but are not limited to):

  • Using appropriate information architecture, categorization and grouping principals, will allow you to configure default metadata values.  This eliminates the need for a user to input the metadata value but allows it to be present for search, faceted filtering, aggregation, workflow decision and triggers, etc.

An example of this would be a Project Number metadata column associated with a project document.  If you have all documents, associated with a specific project, managed in a site, you already know the project number and can configure a default value; i.e. the Project Number.

  • User education is also a very important technique.  The more your users understand the value of metadata, the more likely they will be to ensure metadata values are accurate.

Demonstrate the value of metadata to your users by setting up a POC and show them search results with and without the use of metadata.  Demonstrate faceted filtering and advanced search with and without the use of metadata.  It is a powerful message.

Metadata is also the primary means by which users can filter aggregate views of content; this is known as faceted filtering.

Provide Meaningful and Accurate Information to Consumers

Virtually all employees in your organization will consume information to support their specific day to day business needs.

The consumption of information will be determined by a specific contextual need.  For example, an employee may wish to search your Intranet for the latest parking policy or a project team member may wish to find notes for a meeting that occurred two months ago.

When considering the consumption of information, we also must consider how it will be presented to those consumers; search results and aggregate views are but only a few that will be required.  Other means of presenting information will include dashboards, printed reports, charts, etc.

The only means by which we can query information and produce accurate search results, faceted filtering, aggregate views, dashboards, printed reports, charts, etc. is by first architecting the information; so we know what it is we are querying.  Without this, none of this will be possible!

Promote the Agile Evolution of Information Use

There are many factors that drive the adoption and evolution of information use.  Of these, the most critical include:

Managing the Change of Information – Information is changing on a regular basis; project documents change and evolve, employee handbook and corporate policies are in a constant state of evolution.  Architecting your content management solution to facilitate the evolution of information is critical.

Work-in-Progress versus Published Information – During the process of information creation and collaboration, the state of that information is considered work-in-progress.  The solution must provide the means to determine work-in-progress versus published.  In some cases this is delivered using content versioning or security.  In other cases it requires a more complex means of disseminating the information.

Keeping Information Fresh and Up to Date – It is the responsibility of information owners to keep information fresh and up to date.  If the information in your content management solution is allowed to become stagnant and out of date, consumers are less likely to visit your Intranet and information consumption.

Versioning – An advanced content management solution provides the ability to version your content, view and roll-back to previous versions.  The lifecycle of content management requires this functionality.

Archival and Destruction – When information has reached the end of its lifecycle, often it is archived and/or destroyed.  This applies to all information in your environment, not just corporate records.  Thoroughly understanding the lifecycle (creation, evolution and eventual destruction) of information is a critical element of information architecture.

Governance

Governance of your information management solution comes in many forms; policies, procedures, processes, guidelines and education.  Without governance all of your hard work architecting a solid solution will eventually crumble.  The negative consequences are too many to list in this article.

The primary elements of information and solution governance falls in the following categories:

Infrastructure Governance – In most organizations, there is sufficient infrastructure governance; server builds, patches and update schedules, SLA’s and so on.  The infrastructure to support your SharePoint installation will mostly fall within this existing governance.

Solution Configuration and Customization Governance – Configuration and customization governance is equally important as the infrastructure governance.  Implementing processes and controls to appropriately manage change, meeting up-time SLA’s, is critical.

Solution Use Governance – It is here where most implementation teams fall short.  Governing the use of your SharePoint implementation is a means to keep configuration consistent.

Often I hear a department director or manager demand they have administrative rights to their department site.  In most cases, giving a non-technical user administrative rights to anything in SharePoint, is a huge mistake.  There are so many things that can, and will, go wrong in this scenario.  Here are a couple examples:

  • Because the non-technical user doesn’t understand the security model, they inadvertently give access to the wrong users.  I have see employee salary information exposed in this exact situation.
  • Consider a non-technical user creating a new document library and not using the data types (content types) your implementation team configured.  Now that same non-technical user uploads policy documents to this new library.  These policy document won’t be aggregated to your corporate policy book nor could they be searched (and filtered) as other corporate policy documents are.

These are but a couple examples of insufficient use governance; there are many more negative consequences.

My recommendation is to lock your implementation down tight as can be; only allowing the implementation team to make modifications at first.  Implement a federated use governance model as you educate users with the appropriate skills to make modifications that meet your best practices, policies, procedures and guidelines.

Without governing the implementation, customization and use of your information management solution, it will evolve in an inconsistent and out of control manner and quick become of little use to the business.

Education

Education at all levels is of paramount importance.  In most business environments your users have been driven to use file shares, local drives, email systems, etc. to store and manage their information.  Moving your culture from “the way we have always done it” to a completely new environment is a very large chasm to cross.  Users must be appropriately educated to trust and use the new system.

Conclusion

As you can see, there are many factors that contribute to the successful implementation, adoption and use of a SharePoint content management solution.  Installing SharePoint, configuring a few sites and throwing the keys to the kingdom over the wall will fail every time.  On the other hand, implement sound information architecture techniques, governance and education will lead you down a path of success!

If you are in need of help with your SharePoint implementation, Information Architecture, education or training, please don’t hesitate to contact me; this is what I specialize in!

 

Time to Plant Tomatoes

It’s that Tomato time of year!  Late February, early March have all of your tomatoes planted and growing.  Sow your seeds (indoors) in early February so you are ready to thin and transplant outside.  Today I planted Big Beef and Red Beefsteak Tomatoes.  Planting now should give me my first harvest in late May to early June.

I stagger my planting of tomatoes every two weeks and will harvest through August.  In two weeks I will start Roma Tomatoes; which are great for canning marinara sauce.

As I have time, I will post recipes on how to make tomato sauce, marinara sauce, spaghetti sauce, etc. and how to can them for long term storage.

Last year I processed and canned about 100 pounds of tomatoes and just finished the last jar of marinara sauce last week.  This means I am going 3 to 4 months without my canned tomato sauces.  This year I’m looking to can about 150 pounds and see if it gets me through an entire season.  I also have to account for gifts; I enjoy giving some away to family and friends.

I have more general Tomato sowing, planting and harvesting information here.

Happy Planting!

 

Chorizo Sausage

I love Chorizo Sausage but found most it you can purchase at the grocery store is very greasy and made from some pork products that aren’t too appetizing!  I won’t get in to the details but you can look it up on the Internet.  Once you learn what it is made of, you may be more likely to use this (or similar) recipe too…

Yields 2 Pounds

NOTES:

  1. It is common for me to double, even triple, this recipe.  I will leave it in the refrigerator for 24 hours then divide it in to 1/2 pound packages and vacuum seal it.  It will keep for 9 months when vacuum sealed and frozen.  However, it never lasts that long in my house!
  2. I always purchase a large pork butt and grind it myself.  It is less expensive and you have more control over the fat content.  During the grind process, I add the herbs and spices.  This makes for a very well blended meat.  Use a KitchenAid Food Grinder Attachment!

Ingredients

2 lbs Ground Pork
3 large Dried New Mexico Chiles (Chile Colorin) or 3 Large Mild Red Chilies (about 3.5-inches)
4 small Dried Chile de Arbol (Chile deArbol) or 4 small Chilies, according to how hot spicy you want your chorizo
1/4 cup Boiling Water
8 cloves Garlic, minced
2 tablespoons Dry Oregano Leaves
2 teaspoons Ground Cumin
1 teaspoon Fresh Ground Black Pepper
1 teaspoon Dark Brown Sugar
4 tablespoons Cider Vinegar
2 tablespoons Tequila (and a shot-glass for the chief)
3 1/2 teaspoons Salt

 

Directions:

  1. Break the colorin chiles into 3 pieces, and put them and the deArbol peppers in a bowl.
  2. Pour the boiling water over them and let them sit until they’re re-hydrated and soft.
  3. Place the re-hydrated chiles together with the liquid into a food processor and add the garlic, oregano, cumin, black pepper, sugar, vinegar, tequila, and salt, and process until the mixture is smooth.
  4. Place ground pork and the liquid mixture into a sturdy electric mixer (such as a KitchenAid) and mix well.
  5. When secured in a sealed container, this chorizo keeps well in the refrigerator for a couple of weeks. I usually let it sit in the fridge for a couple of days to let the flavors meld, then divide it into smaller portions of 3 to 4 ounces (that’s about two servings) and freeze it.  If you have casings, you can also stuff it into those and smoke it – very tasty!

SharePoint 2013 Task Management

Task Management

The task management functionality available in SharePoint 2013 has many new and improved features. Features such as the ability to create sub-tasks, a new timeline view, more robust management of tasks using Microsoft Project 2013 and so on. In this article I will take a deeper look in to these new and enhanced features of SharePoint 2013 Task Management.

For the purposes of this topic, I have created an “out-of-box” site using the Project Site template. No customizations have been made to the site, libraries or lists. The figure below is our demonstration site, using the standard Project Site template.

clip_image001

The figure below shows the standard Tasks list that is included with the Project Site template. The list itself is very similar to what we found in earlier versions of SharePoint. However, you will notice a timeline view is now available. More about the timeline view later.

clip_image002

Task Assignment

An improvement in SharePoint 2013 task management is the ability to assign multiple resources to a task. In previous versions, you could only assign a single resource which made using the “out-of-box” task management cumbersome when managing more complex projects.

clip_image003

Subtasks

You now have the ability to create subtasks which is another new feature found in SharePoint 2013. I believe this was primarily implemented to support Microsoft Project integration. More on Microsoft Project integration below.

To create a subtask, click the parent item context menu and select the Create Subtask option.

clip_image004

The figure below shows our task list after adding 2 subtasks.

clip_image005

Timeline View

The timeline view provides you with the ability to display specified tasks in a timeline, or Gantt, style view. The timeline view can be enabled or disabled for any task list in SharePoint. This is accomplished by editing the web part properties and checking/unchecking the Show timeline option.

clip_image006

You can add and remove tasks from a timeline by clicking the task item context menu and selecting Add to Timeline or Remove from Timeline option.

clip_image007

In the figure below, you can see that I have added the Human Resources Intranet Requirements task to the timeline. You will find the timeline view is best suited to display high-level tasks and milestones. If you add too many tasks it will become cluttered and difficult to read.

clip_image008

Aggregating Tasks to Your Personal Site

One of the best new features available in SharePoint 2013 is the aggregation of tasks, assigned to you, in your personal site. This provides you with a view of all tasks, across the entire farm, aggregated in one place. This means, regardless of where a task resides (a department site, project site, team site, etc.) they will all be aggregated to your personal site.

To accomplish this in the past, we had to customize a solution using search web parts, create a custom developed solution or purchase a 3rd party tool.

Note: The personal site task aggregation feature utilizes the SharePoint FAST search engine to index task information and make it available for querying. This means, tasks will not be aggregated to your personal site until the search indexer has processed the tasks.

To see an aggregate view of all your assigned tasks, simply go to your personal site and click the Tasks link in the left vertical navigation area.

In the figure below, you can see the tasks assigned to myself.

clip_image009

You might have also noticed, when you click a task item context menu, you have the ability to edit the task and go directly to the containing site or list. The is very convenient for managing tasks that reside in many locations of your Intranet.

Managing Tasks with Microsoft Project

Microsoft has made the management of SharePoint tasks, in Microsoft Project very convenient. To open a task list in Microsoft Project, simply navigate to the task list and click the Open with Project option on the ribbon bar.

clip_image010

Now that your SharePoint task list is open in Microsoft Project, you can use all of the features available in Microsoft Project.

clip_image011

After you make updates, in Microsoft Project, and save them, all of those updates are posted to the SharePoint task list.

Note: You may be asking yourself, Microsoft Project has many more features and fields then a SharePoint task list; is this information lost when you close Microsoft Project? The answer is no! Microsoft Project and SharePoint are tightly integrated and the actual project file is also saved to the site; in the Site Assets library.

clip_image012

Extending Microsoft Project Fields to a Task List

There may be situations when you wish to publish additional information from Microsoft Project to your task list in SharePoint. This can be easily accomplished by mapping fields using the following steps.

For the purposes of our demonstration, I will map the Duration field from Microsoft Project to our task list in SharePoint.

  1. In Microsoft Project, click the File tab in the ribbon bar.
  2. In the Info section, click the Map Fields button.

clip_image013

  1. In the Map Fields dialog, click the Add Field button.
  2. In the Add Field dialog, for the Existing Project Field, select Duration from the drop-down list.
  3. For the New SharePoint Column, leave the default as Duration.
  4. Click the OK button when you have completed these steps.
  5. Click the OK button in the Map Fields dialog when you have mapped all the desired fields.

Now the Duration field in Microsoft Project is mapped to a new Duration field in the SharePoint task list. Save your project and the SharePoint task fields will be updated, containing the mapped field values.

As you can see in the figure below, the Duration field now contains the duration information from Microsoft Project.

clip_image014

Once you start editing and managing your project tasks in Microsoft Project, I have learned that it is easier to continue using Microsoft Project; instead of switching from editing tasks in SharePoint some of the time and in Microsoft Project other times.

Conclusion

As you can see there are many new and improved task management features found in SharePoint 2013. The ability to assign more than one resource to a task and the timeline view are of my personal favorites. In addition, I use the Microsoft Project integration on virtually all project management scenarios I am involved with.

It is important to note; all of the features described in this article are available in Office 365. I use Office 365 to run my business and manage all client projects and these task management features and Office integration I use on a daily basis.

If you are interested in discussing these features, obtaining a demonstration of how they may improve your task management needs in your environment, please Contact Me. If you have any questions or comments, please leave a comment below; I will answer as I have availability.